DJI RS 3 Gimbal Stabilizer Combo
Out Of Stock
Rs 159500
.00
Pay in 6 / 12 / 18 / 24 Months
Starting From Rs. 7,975.00
Pay in 12 / 6 Months
Starting From Rs. 26,583.00
Pay in 3 / 6 / 12 / 18 / 24 Months
Starting From Rs. 6,646.00
Pay in 6 Months
Starting From Rs. 26,583.00-
Package
What's in The Box
- DJI BG21 Grip for RS 3 Gimbal
- DJI Briefcase Handle for RS Series
- DJI RS Focus Motor (2022)
- Focus Motor Rod Mount Kit
- Focus Gear Strip
- Lens Support
Key Features
- Lightweight Design with 6.6 lb Payload
- Combo Includes Focus Motor, Case, Cables
- Instant Mode Switching
- Advanced 1.8" OLED Touchscreen
The DJI RS 3 Combo includes the redesigned RS 3 gimbal stabilizer, an even lighter and sleeker gimbal than the Ronin RSC 2 at only 2.8 lb and with a payload of up to 6.6 lb. This tiny gimbal is tough enough to support and stabilize a Sony a7S III or Canon R5 with a 24-70mm zoom lens attached. With a larger full-color OLED display, a new fine-tuning knob, and greater stability, the RS 3 can become an essential part of your compact camera kit. The Combo kit includes additional essentials such as an updated Focus motor, a motor rod mount kit with gear strip, a briefcase handle, two multi-camera control cables, and a lens-fastening strap.
More Info
Out Of Stock
Rs 159500
.00
Pay in 6 / 12 / 18 / 24 Months
Starting From Rs. 7,975.00
Pay in 12 / 6 Months
Starting From Rs. 26,583.00
Pay in 3 / 6 / 12 / 18 / 24 Months
Starting From Rs. 6,646.00
Pay in 6 Months
Starting From Rs. 26,583.00-
Package
What's in The Box
- DJI BG21 Grip for RS 3 Gimbal
- DJI Briefcase Handle for RS Series
- DJI RS Focus Motor (2022)
- Focus Motor Rod Mount Kit
- Focus Gear Strip
- Lens Support
Get Expert Opinion
Overview
The DJI RS 3 Combo includes the redesigned RS 3 gimbal stabilizer, an even lighter and sleeker gimbal than the Ronin RSC 2 at only 2.8 lb and with a payload of up to 6.6 lb. This tiny gimbal is tough enough to support and stabilize a Sony a7S III or Canon R5 with a 24-70mm zoom lens attached. With a larger full-color OLED display, a new fine-tuning knob, and greater stability, the RS 3 can become an essential part of your compact camera kit. The Combo kit includes additional essentials such as an updated Focus motor, a motor rod mount kit with gear strip, a briefcase handle, two multi-camera control cables, and a lens-fastening strap.
Quick Release Plates
With dual-layered quick release plates, mounting a camera onto RS 3 is fast and convenient. There is no need to rebalance the gimbal after swapping out a new battery or memory card.
Automated Axis Locks
When the gimbal is powered off, you can press and hold the power button, and the three axes unlock while the gimbal expands automatically, allowing you to start working in just two seconds. Press the power button once, and the axes automatically lock and enter sleep mode, making a move or storage significantly more efficient.
Wireless Shutter Control
By implementing Dual-Mode Bluetooth, the RS 3 supports wireless shutter control, saving time and effort with every use. After the initial Bluetooth pairing, you can control video and photo shooting by simply pressing the record button on the stabilizer. Previously paired cameras can automatically reconnect after the first use, eliminating the need for a camera control cable.
Integrated Controls
- With a newly added fine-tuning knob on the tilt axis, the camera can slide forward or backward with millimeter-grade precision adjustments to achieve accurate balancing more easily when changing the lens.
- By simply sliding the new gimbal mode switch, you can alternate between Pan follow, Pan and Tilt follow, and FPV modes. The FPV mode selection is also customizable to 3D Roll 360, Portrait, or Custom, allowing you to adjust your equipment and get started as fast as possible.
- Rotating the front dial allows you to control zoom or focus. It can also be customized to control the camera's shutter, aperture, ISO, or gimbal movements, making it exceptionally convenient for single-handed operation.
Third-Gen RS Stabilization Algorithm
Empowered by a next-generation stabilization algorithm, the RS 3 provides 20% enhanced stability over the RSC 2, effortlessly managing low-angle shots, running scenarios, or switching between high and low positions.
Get SuperSmooth Results
When SuperSmooth mode is enabled, RS 3 increases motor torque to further enhance stabilization, delivering stable footage even in fast-moving scenarios or with 100mm-equivalent focal lenses.
1.8" OLED Touchscreen
Compared with the black-and-white screen of RSC 2, RS 3 is equipped with a 1.8" OLED full-color touchscreen with an 80% larger display. It also supports most Ronin app settings, providing intuitive and precise control together with the redesigned user interface.
Enhanced Battery and Fast Charging
The new RS 3 battery grip features a cartridge design, making it easier to swap batteries and smaller for storage compared with RSC 2. It can even be charged separately from the gimbal. The new battery grip provides an extended runtime of up to 12 hours, enough for continuous shooting all day. It supports 18W PD fast charging with a charge time of just 2.5 hours. It can even be used while charging to keep RS 3 powered almost indefinitely.
Intelligent Functions
The camera retains all the intelligent motion functions such as Dolly Zoom, Motionlapse, Track, Time Tunnel, and Panorama.
New Briefcase Handle
The redesigned briefcase handle is foldable for convenient storage and comes with a new ergonomic handle to make it easier and faster to install and switch to Briefcase mode. The built-in cold shoe mount and 1/4"-20 mounting holes can connect to external monitors for shooting assistance, making low-angle camera movements more intuitive.
All-New Focus Motor
The next-generation DJI RS Focus Motor (2022) provides torque three times stronger (up to 1 N·m) and noise is reduced by 50%. This delivers a smoother focusing experience and reduces the effect on audio recording. It also adopts a quick-release structure, allowing it to be assembled easily without any tools for faster use.
DJI RS 3 Gimbal Stabilizer Combo
Gimbal
Number of Axes
3-Axis (Pitch, Roll, Yaw)
Rotation Range
Yaw (Pan): 360°
Pitch (Tilt): -112 to 214°
Roll: -95 to 240°
Pitch (Tilt): -112 to 214°
Roll: -95 to 240°
Follow Speed
Pan: 360°/s
Tilt: 360°/s
Roll: 360°/s
Tilt: 360°/s
Roll: 360°/s
Load Capacity
6.6 lb / 3 kg
Connectivity
Ports
3 x USB Type-C (Control) Output
1 x USB Type-C (Power)
1 x USB Type-C (Power)
Wireless Frequency
2.4 GHz (2.4 - 2.484)
Wireless Protocol
Bluetooth 5.0
Battery
Battery Type
1 x Built-In
Capacity (Wh)
3000 mAh / 21 Wh
Battery Runtime
12 Hours
Battery Chemistry
Lithium-Ion Polymer (LiPo)
Power
Operating Current
-
Environmental
Operating Temperature
-4 to 113°F / -20 to 45°C
General
Mounting
1 x 1/4"-20 Female
1 x Cold Shoe Mount
1 x Cold Shoe Mount
Dimensions
16.1 x 10.2 x 7.7" / 410 x 260 x 195 mm
Weight
2.2 lb / 990 g
Packaging Info
Package Weight
6.94 lb
Dimensions (LxWxH)
12.85 x 11.55 x 6"
DJI RS 3 Gimbal Stabilizer Combo Q & A
Quick Compare
Add-On Savings
Related Products
